"HEADS UP" TITANIUM HEAD TUBE EXTENSION

* Presses into the top of your bicycle's headtube to extend stack height.
* Works with all frame materials.
* Superlight, only 24 grams.
* Compatible with upper headset bearing cups only. Not intended for use with lower headset bearing cups.

SEE ALSO: Optional weld-in service (for titanium frames only).

TWO SIZE STANDARDS: 
-- 1" steerer tube and standard English/British 30.2mm ID headtube combinations only.
-- 1-1/8" steerer tube and standard English/British 34mm ID headtube combinations only. 

INSTALLATION:
* Installation by your local bike shop or framebuilder is recommended.
-- With upper headset bearing cup removed, press the Heads Up extension into the head tube in the place of the upper headset bearing cup.
-- Press the upper headset bearing cup into the Heads Up extension as during normal installation.

PLEASE NOTE: Installing this part does not increase the available height of an existing steerer tube. To achieve a higher handlebar height, a new fork with a longer steerer tube may be required. Intended for one-time, permanent installation.